Insolated USB/CAN Adaptor

for Microsoft Windows and with sources for Embarcadero RAD Studio XE

 

Introduction

The USB/CAN Adaptor from Reusch Elektronik is an easy to use module in industrial quality for a low price. The CAN connector is insolated against the USB connector (except the shielding). The bus termination is controlled by software. A Windows application is available, to transmit an receive CAN messages. C++ source and demo program is available, which is developed with Embarcadero RAD Studio XE. The USB communication is based on the open source LibUSB-Win32 driver set. This driver will be installed by an installation program, also under Windows 10. The driver installation is done by the setup program of the application software. The source also contain a command line tool to install the LibUSB-Win32 drivers, especially for Windows 10.

Characteristics Overview:

  • insolated CAN interface

  • software controlled CAN bus termination

  • supported transfer rates: 10, 20, 50, 100, 125, 250, 500 und 1000kBit/s

  • up to 14 CAN filter

  • FIFO -buffer for up to 64 incoming CAN messages

  • FIFO buffer for up to 8 outgoing CAN messages

  • USB 2.0 full speed (12MBit/s)

  • drivers for Windows XP up to 10

  • application for transmission and receive of CAN messages (sources included)

  • a demo program and interface sources in C++ (Embarcadero RAD Studio XE)

  • shielding and very robust metal casing (aluminum)

  • industrial quality

  • developed and manufactured in EU/Germany

Additional Information:

 

Technical Data

Supply voltage 4,75 ... 5,25V DC; typ. 5,0V DC supplied over the USB connection
Current consumption typ. about 51mA, max. 100mA  
Insolation voltage 100V between CAN and USB respectively casing
CAN transfer rates 10, 20, 50, 100, 125, 250, 500 and 1000kBit/s  
Bus termination controlled by software setting will be kept in powerless state

Products and Prices

This product is available as manufactured and checked device. The scope of delivery contains the device only without any accessory.

Price: Euro 89.00 incl. VAT, plus shipment costs (category C)

Order No.: UCI

How to order and pay

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Order by E-Mail:
Order by FAX: +49-7541-81483

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

Downloads

The following files are available for download.

Technical documentation Rev. 1.0 uci_10_Manual.pdf 1,3MByte
UCI ComCenter (application software) uci_Setup_1000.exe 6,4MByte
Sources (C++, Embarcadero RAD Studio XE) uci_src_2020_05_02.zip 7.6MByte

Links

The following web pages contain additional information about the used USB  driver.

LibUSB-Win32 driver for Microsoft Windows http://libusb-win32.sourceforge.net/
Zadig - USB driver installation made easy https://zadig.akeo.ie/